Functions
42
Mode options
Turn the trigger on and press the mode button repeatedly to switch between the
different modes . You can select the universal mode, Canon mixed mode, Canon
master control TTL mode, Canon master control M mode, Canone master control
Multi mode, Nikon master control mixed mode, Nikon master control Multi mode .
Test
Press the test button to check whether the flash units with the same channel will
flash with the desired mode and parameters .
LCD
Press any button to turn on the LCD backlight . If the trigger is not used for about
10 seconds the LCD light will automatically turn off .
Restore Factory settings
Press the OK button for about 3 seconds and the trigger will restore the factory
settings .
ENGLISH