User's Manual; Start-Up Of The Device - Planika Faro KF 22 Installation Et Manuel D'utilisation

• FARO is equipped with the anti-tilt valve which shuts the device down in case if the fireplace is tilted
or collapsed. The valve automatically cuts off the gas supply to the controller and this extinguishes
the flame.
WARNING!!! make sure the anti-tilt valve is always installed in upward position.
4.

USER'S MANUAL

The FARO fireplace has a control valve with a built-in ignition for the main burner (without pilot flame). The flame
height of the main burner may be appropriately regulated with by turning the knob. Next to the knob is placed electric
ignition button (powered by AAA battery). The control panel is placed in front just above the door of the gas cylinder
compartment ( ).
Fig 9

4.1 Start-up of the device

•
Make sure that the knob is placed in „OFF" position (all the way clockwise) (
Fig 8– Anti -tilt sensor
Fig 9– Control panel
Fig 10 – Off position
13
).
Fig 10