Planika Faro KF 22 Installation Et Manuel D'utilisation page 11

Disconnection of the gas cylinder
Twist-on connection
1.
Turn off the FARO – put it into the OFF position. The main burner need to be turned off.
2. Turn the bottle valve into the OFF position
(clockwise).
3. NEVER DO NOT unmount the regulator (or
connecting nut) when the bottle valve is
open.
4. TAKE OFF the regulator (or the connecting
nut) with the use of a wrench or a
connecting knob.
5.
REPLACE the linkage closer or cap on the
empty or partially full bottle if it's not being
used.
Quick-release
2. Turn the switch into the OFF position.
3. Take off the quick-release regulator by
pressing the
simultaneously pulling the whole regulator
upwards.
4.
REPLACE the tightening cap on an empty or
partially full bottle if it's not being used.
11
switch horizontally and