Drive Unit, Hmi And Accessories Care; Battery Packs Care; Charger Care; Ebike Care - MAHLE X20 Mode D'emploi

Products are not guaranteed against natural wear and
tear from normal use and aging. The X20 can be installed
in kid's eBikes. For this type of use, ensure that your child
is supervised and follow the eBike manufacturer's safety
instructions.
Cleaning and user maintenance shall not be executed by
children without supervision.

1.2.1. Drive Unit, HMI and Accessories care

Remove any dust or mud on the surface of your Drive
Unit, the HMI (displays, buttons, or remotes) and external
accessories with a clean cloth. Never wash any of your
eBike components using a power washer.
It is possible to clean or replace the freewheel and the
bottom bracket by following the specific instructions in
this manual or in manual of the bicycle manufacturer.
CAUTION
Ensure if you replace the rotor of the motor that the
screws fill the follow specifications:
Min. 8 mm
Max. 10 mm

1.2.2. Battery Packs care

The batteries, especially the internal ones, only require
removal if being replaced by an official service. They
include sealed connections that protect against short
circuits. Do not manipulate or connect anything in
between the components. Never wash external batteries
by using a power washer.

1.2.3. Charger care

Disconnect the charger and all general power supply for
any cleaning operation. The charger is designed for
indoor use only. Do not expose it to wet conditions, rain
or snow.

1.2.4. eBike care

Keep your eBike system clean and dry for long-term or
winter storage. We do recommend a charging level of at
least 60-80% during long-term storage. To ensure a
correct level of charge, you can either check the length of
the HMI LED line, connect the Pulsar ONE display or the
Smartphone application to the bike.
The power consumption can significantly increase during
use in winter, especially when the temperature drops
below 0 °C. Please fully charge the eBike and external
batteries before any winter use and remember that the
range of your eBike could be reduced.

1.3. Transportation of your eBike system

There is a clear regulation for the transportation of the
eBikes and batteries by ground, air/boat or train. There
are global recommendations with regard to internal and
external batteries. Remember that in all cases, the best
option is to transport the battery when it is below 30%
charged. For full eBike system, check the local
regulations.
1.3.1. Transportation of full eBike by car
The internal battery shall not be removed from the bike for
transportation. External batteries need to be removed
and transported in a safe area inside the car.
1.3.2. Transportation of full eBike by air
Max. 2,8 mm
The IATA (International Air Transportation Association)
refuses to transport any eBike batteries. Please check if
you can transport your eBike without the internal battery,
send the battery separately and have it installed at your
destination.
1.3.3. Transportation of full eBike by train
In most cases, eBikes are permitted to be transported
inside trains, if the train does not provide a specific safe
area for transportation. Check your local regulations or
with your transportation company before setting off on
your trip.

1.3.4. Transportation of batteries for repair

If, for any reason it is necessary to ship the battery, this
needs to be done by an official service following the
specific rules for transportation of dangerous goods, the
recommendations
manufacturer. The battery needs to be placed in a
specific, certified box and complemented with all the
official documentation i.e., the MDSD report. This
process cannot be performed by private persons.
of MAHLE and the
005
eBike