Battery Use; Accessories; Pulsar One Display - MAHLE X20 Mode D'emploi

MAHLE X20 System · Accessories
016
V.1.0.1 - 04/2022
3.8.2. Updating eBike system
Once the files are into the Active Charger you can update
your system. For updating a second eBike you will need
to repeat the full updating process.
1. Connect the charger of the Power outlet
LED of the charger will display a steady
WHITE light.
2. Connect the Charger to the eBike
Connect the charger to the eBike as
you would connect it for a normal
charging process. The LED of the
charger will constantly flash in PURPLE
while the update is being performed.
3. Update Completed
Once the update process is finished
the LED of the charger will turn to a
steady GREEN light for 10 seconds.
After that, the charger goes back to
normal operation.
Error while uploading
If an error occurred during the updating
process, the LED of the charger will
turn to a steady RED light for 10
seconds. After that, the charger goes
back to normal operation.

3.9. Battery Use

MAHLE SmartBike Systems does use high quality cells
for both, inner- and external batteries. We do this to get
the most out of our minimalistic battery following our
LIGHT, SPORT, SMART premise. To ensure a long battery
life, please follow the guidelines below:
• One important factor is the number of charging
cycles – every time you charge the battery it will
degrade.
• If you store the battery, try to keep the battery status
between 30% and 60%.
• Don't leave your bike exposed to the sun for
extended periods
• Don't expose the battery to cold temperatures for
extended periods of time.
• When starting an activity, do not use the maximum
assist right away – your battery needs to reach its
operating temperature first
• Do not store your battery 100% charged for long
periods and remember to drain it frequently
• When storing your bike for longer periods of time
ensure the temperature stays within 10-20 degrees.
NOTICE
Remember a battery is considered as a consumable
good.

4. Accessories

Your X20 System is compatible with various accessories.
Your eBike might already be initially equipped with some
additional accessories from brand side. If your eBike is
not equipped yet with additional components, the
following accessories can always be added to the X20
System:

• Pulsar ONE display

• e-Shifters
• Range Extender
4.1. Pulsar ONE display
Pulsar ONE is an ANT+ eBike computer developed by
MAHLE specially designed to be used with ANT+
compatible MAHLE systems (X35+ or X20). The Pulsar
ONE connects wireless to the eBike system using the
ANT+ LEV communication protocol (Light Electronic
Vehicle – all new MAHLE systems are fully compatible).
The 2.1" wide screen lets you see vital information about
your eBike system such as battery level, assistance level,
light system status, range and errors, as well as basic
riding information such as speed or time. This information
is complemented by additional essential data for any
rider, such as average speed, maximum speed, ride time,
ride distance, eBike odometer, heart rate, cadence, etc.
Pulsar ONE display
SKU: 330 100 000 00 000
Includes display, Screen protector, battery CR2032 and
user manual.
• 2.1" black & white LCD with 3 buttons
• Wireless connectivity by ANT+
• Waterproofness IP67
• Battery type CR2032 (Included)
• Certifications (CE, FCC, IC, KCC, Telec and RCM)
ANT+ LEV, HR, CAD, PWR, CTF
• Dimensions (57.7 mm x 41.1 mm)
• Weight 28 grs (with CR2032)
NOTICE
You can use the buttons of the display to control the
assist levels and the lights. Further information on this
product can be found in the user manual.