A
dditional Functions
TIME DELAY
The TIME DELAY feature allows you to have
the dryer run at a time that is more convenient,
for example when electricity rates are cheaper.
The cycle can be delayed from 3 hours up to a
maximum of 19 hours.
1. Load the dryer and close the door.
2. Press the POWER button.
3. Select the desired cycle and options.
4. Press the TIME DELAY button until the
desired delay time is displayed.
5. Press the START/PAUSE button.
WRINKLE CARE
Selecting this option will tumble the load
periodically for a few seconds without heat.
This will continue for up to 3 hours after the
selected cycle, or until the door is opened.
This prevents wrinkling of unremoved dry
items until they can be removed.
Note
If the door is opened during the drying portion
of a cycle before WRINKLE CARE has started,
the cycle will not be cancelled and WRINKLE
CARE will begin as soon as the normal drying
portion of the cycle is completed.
CUSTOM PGM
If you have a special combination of settings
that you use frequently, you can save these
settings as a CUSTOM PROGRAM.
* To Save a CUSTOM PROGRAM
1. Turn on the dryer.
2. Select a cycle.
3. Use the cycle modifier buttons to adjust the
settings for that cycle.
4. Set any other desired cycle options.
5. Press and hold the CUSTOM PROGRAM
button for 3 seconds. You will hear two beeps
to confirm the settings have been stored.
To Recall a CUSTOM PROGRAM
1. Press and release the CUSTOM PROGRAM
button. The stored settings will be displayed.
2. Press and release the Cycle Selector Knob to
start the cycle. The dryer will start
automatically.
Note
You can only save one CUSTOM PROGRAM
program at a time. If you press and hold the
CUSTOM PROGRAM button for 3 seconds, you
will overwrite any previously stored CUSTOM
PROGRAM settings.
Once CUSTOM PROGRAM has been recalled,
any of the memorized modifiers or options can
be adjusted. However, if the Cycle Selector
Knob is rotated, CUSTOM PROGRAM will be
cancelled.
F
17