Cisco Systems Linksys WPC54G Guide D'installation Rapide page 2

1
Begin Installation
IMPORTANT: Do not install the Adapter in Your PC
until you are instructed to do so in Step 2 or the
Adapter will not install propertly.
The Wireless-G Network Adapter is
installed and set up using the Setup
Wizard that comes on the CD
enclosed.
A
To begin, insert the Setup
Wizard CD-ROM into your CD-
ROM drive. The Setup Wizard
should run automatically, and
the Welcome screen should
appear.
B
To install the Adapter, click
Click Here to Start on the
Welcome screen.
C
After reading the License
Agreement, click Next to
continue the installation and
Windows will begin copying the
files onto your PC.
D
The Setup Wizard will now
prompt you to install the
Adapter in your PC.
Proceed to Step 2.
2
A
C