Bosch UPS 2416 A Manuel D'installation page 11

UPS 2416 A
Functional description
The UPS 2416 A in plug-in design with rack and panel
connector is a universal single output power supply
unit for the FPA fire detection system.
- The module is protected against overvoltage and
reverse polarity.
- The output voltage is externally monitored and
regulated.
- The green onboard LED indicates the power supply
is working (DC output).
- In the case of a mains failure or failure of the DC
output voltage, the output at terminal FAULT (Pos.6)
drops to 0 V.
Pos. Marking
1 ACL
2 ACN
3
4 DC+
5 DC-
6 FAULT
7 RTH+
8 RTH-
Use the power supply unit only in the
purpose-designed
brackets and a fire enclosure (e.g. panel
housing)!
Technical specification
Input voltage (min - max)
Input frequency
Current consumption
Efficiency factor
Hold up time
Output voltage
Maximum load
Continious output power
Cooling
Protection class as per IEC 60950 / EN 60950
Permissible operating temperature
Permissible storage temperature
Permissible relative humidity
Housing material
Housing color
Dimensions (H x W x D)
Weight
Bosch Sicherheitssysteme GmbH
Connection
AC Mains supply
Protective ground
26 V DC . . . 29 V DC Output plus
0 V DC Output minus
Power fault
Temperature sensor plus
Temperature sensor minus
power supply
100 V AC . . . 240 V AC (min - max)
50 Hz . . . 60 Hz
1.95 A max.
> 85 %
> 16 ms at 115 V AC
26 V DC . . . 29 V DC
6 A
160 W
Convection without fan
I
-5 _C . . . 50 _C
-20 _C . . . 60 _C
max. 95% non condensing
Aluminium, anodized
Semi gloss black
approx. 200 x 100 x 40 mm
approx. 780 g
1 2 3 4 5 6
1
(23 _F . . . 122 _F)
(-4 _F . . . 140 _F)
F.01U.003.349 | 6.0 | 2009.03
en | 11
7 8
LED
8