Appendix
CONVERTING DISHWASHER WITH FACTORY-
EQUIPPED POWER CORD TO A PERMANENT
CONNECTION
This procedure requires the conversion leads set
aside in Step 1.
• Make sure the power cord for the dishwasher is
unplugged from the wall outlet.
• Remove screw from junction box cover and
remove cover if present.
• Disconnect the three power cord conductors from
the dishwasher harness. See Figure BB.
• Remove and discard the power cord.
• Connect the conversion harness (included with
dishwasher) to the dishwasher harness by
connecting like-colored wires. See Figure CC.
• Return to Step 16 in these instructions to complete
the conversion.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
GE Appliances
General Electric Company
Louisville, Kentucky 40225
GEAppliances.com
16
Figure BB
Figure CC
Conversion Harness
© 2014 General Electric Company