Orbit b-hyve Guide De Démarrage Rapide page 4

Timer Installation–Connecting to Wi-Fi
Plug in your Orbit® B-hyve timer
Once your B-hyve timer is plugged into
the power source, it will automatically
look to pair with your smart device. The
will begin to blink blue. This indicates
that your timer is ready to pair with
your smart device. Ensure that your
smart device has Bluetooth® turned on.
Connect to your Orbit® B-hyve timer
Open your B-hyve app, create an
account or login, and follow the step-
by-step process to add and set up your
device. The B-hyve app will connect
to your device and you will, then, be
guided to connect to your home Wi-Fi
network.
Connect to your Wi-Fi network
Select your network from the list and
enter the password for the network to
connect your timer to your Wi-Fi signal.
When connected, the will illuminate
solid white indicating a successful
pairing.
6
Note: If you do not see your network name
in the list, tap the refresh button in the
app. If your network name still does not
appear, tap "Advanced" in the app and
enter your network name and password.
This device will only connect through 2.4
GHz Wi-Fi networks. 5.0 GHz networks
are not supported and will not appear in
your app.
FOR OPTIMUM TIMER
PERFORMANCE, CONNECT
TO WIFI TO RECEIVE THE
LATEST TIMER UPDATES.
Programming and Operation
Programming the timer
The app has help screens and video
to assist you with Wi-Fi connections,
programming, smart watering and other
general questions you may have.
Note: Your programmed schedules
are stored both in the app and on the
timer. Watering will continue, if Wi-Fi
connection is lost.
Manual Operation
All programming and full functionality
of the timer are available in the B-hyve
app. If you have the need, there are
some basic operations you can perform
directly at your timer.
Function
Hold until (water ALL stations) appears, then release.
MANUAL WATERING Quickly press
Default watering is 10 min. per station.
CANCEL STATION Press
RAIN DELAY
Set in app;
ON/OFF Hold
HARD RESET
Button Press
again until desired station appears.
once to cancel current station.
blinks yellow and appears.
for 10 sec. until turns white.
Quickly press 5 times.
7