Orbit b-hyve Guide De Démarrage Rapide

FRONT
1 /
11
4
WELCOME TO
QUICK START GUIDE
Box Contents
Wi-Fi Hub
Quick Start Guide
1) Power Your Wi-Fi Hub
Plug the Wi-Fi Hub into an indoor outlet.
Choose an indoor location for your hub near
the outside location of your timer and within
range of Wi-Fi.
Avoid areas where the signal must travel
through more than one wall, dirt, or thick
steel barriers.
2) Enter Pairing Mode
Press the B-hyve button to enter into
pairing mode. Your hub will flash a
blue light every 5 seconds.
To activate pairing mode press the B-hyve
button 5 times. The light will flash red, then
blue, to indicate that the timer has been
reset and is back in pairing mode.
3) Open the B-hyve App
Once you are in the B-hyve App, tap on settings,
tap devices, and finally tap add device. The app
will walk you through the rest of the process.
For new users, search for "B-hyve"
and download the free Android
or iOS app. Create an account to
begin timer setup.
4) Complete Setup
Once you complete setup you can start
adding timers to your hub.
Scan for access to a full user manual,
videos, and more. Or visit us at:
bhyve.orbitonline.com
[ 104.78]
1 /
4
8
7 /
1
8
[ 47.62]
7 /
1
8
[ 47.62]
7 /
1
8
[ 47.62]
7 /
1
8
[ 47.62]
7 /
1
8
[ 47.62]
7 /
1
8
[ 47.62]