tormatic B-1200 Installation page 55

Check list for the garage door operator
Confirm features at start-up with a check mark.
No. Equipment
1.0 Garage door
1.1 Manual operation of the door
1.2 Fastenings/connections
1.3 Pivots/joints
1.4 Track rollers/track roller holders
1.5 Seals/sliding contact strips
1.6 Door frame/door guide
1.7 Door leaf
2.0 Weight counterbalance/safe opening
2.1 Springs
2.1.1 Spring strips
2.1.2 Spring break device
2.1.3 Safety elements (spring connector,...)
2.2 Wire cables
2.2.1 Mounting
2.2.2 Cable drum
2.3 Fall protection
2.4 Concentricity of T-shaft
3.0 Operator/controls
3.1 Operator/sliding rail/bracket
3.2 Electrical cables/connections
3.3 Emergency release
3.4 Control devices, push-button/hand transmitter
3.5 Limit stop
4.0 Safeguarding of crush and shearing zones
4.1 Force limit
4.2 Protection against lifting of persons
4.3 Site conditions
5.0 Other devices
5.1 Latching/lock
5.2 Wicket
5.2.1 Wicket door contact
5.2.2 Door closer
5.3 Traffic light control
5.4 Photoelectric sensors
5.5 Closing edge safety device
6.0 Documentation of the operator/owner
6.1 Data plate/CE marking
6.2 Door system's declaration of conformity
6.3 Installation, Operation and Maintenance Instructions
B-1200
present Features to be tested
Smooth running
State/Seat
State/Lubrication
State/Lubrication
State/Seat
Alignment/Fastening
Alignment/State
State/Seat/Setting
State
State/Data plate
State/Seat
State/Seat
State/Seat
2 Safety windings
State
State
State/Fastening
State
Function/State
Function/State
State/Position
Stops and reverses
Door leaf stops at 20 kg
Safely distances
Function/State
Function/State
Function/State
Function/State
Function/State
Function/State
Function/State
complete/readable
complete/readable
complete/readable
Testing of the garage door operator
Remarks
55