Kuppersbusch EWK880-0-2Z Mode D'emploi page 21

Function and operation
Door alarm
An alarm will be triggered and the display will begin to flash if the door is
not closed properly for more than 60s. The alarm will stop and the
display will stop flashing as soon as the temperature that has been set is
reached. However, if the noise made by the alarm is a nuisance, you
can switch it off by pressing the key
blink until the temperature setting has been reached, and the alarm will
be automatically re- activated.
ECO mode
This mode can be used to switch off the temperature alarm, the display
and the interior lighting for four days. The temperature inside the wine
refrigerator is maintained.
To activate the ECO mode, press the
time for 5 seconds. Four signals will sound in confirmation. The wine
cooler will then operate in this mode for 4 days.
Low-power mode
The wine cooler has been designed to store your wine safely under
perfect conditions for long periods. Annoying noises may nevertheless
occur in the case of ventilated cooling systems. You may select the low-
power mode to stop the annoying noise made by the fan. To do so, keep
the plus key pressed for 5 seconds. Three warning signals will sound to
confirm that the appliance has switched to the low-power mode.
Press the minus key for 5 seconds to switch off the low-power mode.
Five warning signals will sound to confirm that the appliance has
switched to the low-power mode.
Defrosting
The appliance carries out automatic defrost cycles. When the cooling
cycle is finished, the refrigerated parts of the appliance are automatically
defrosted. The water resulting from the defrosting is channelled into an
evaporation tray on the back of the appliance close to the compressor.
The heat from the compressor evaporates the water in the tray.
Dual mode
In dual mode, you have the option to set the same temperature for both
storage compartments
Proceed with the setting of the two compartments as described in
"Setting the temperature control". Once both displays show the same
temperature, you have the option to settle this uniform temperature
synchronously over the two outer temperature selector buttons
If you want to leave the dual mode, you can regulate the over the two
inner temperature selector buttons
once. The display will continue to
and keys at the same
or
or .
.
EN
21