GM Racing 7152 Instructions D'utilisation page 16

- This mode is designed to set the minimum amount of power delivered to a motor when a motor is
moving.
-
7. Start Curr Limit
INC
Current Limit
50% S_less
- This is designed to prevent a car from being slid depending on the surface of the track. Set "OFF" for
unlimited output. If the throttle stick stay at neutral or brake position for over 10 seconds, this function
is applied. While a motor is rotating, if the stick goes and back to the neutral position
8. Current Limit
INC
Current Limit
50% S_less
9. Reverse Function
INC
Reverse Function
One Way S less
- One Way : This mode is activated as pure brake at lower neutral position during racing.
- Two Way1 : when stick direction is changed, brake should be activated for the selected reverse delay
time then, the direction should automatically changed.
- Two Way2 : When stick direction is changed, if the motor is rotated, brake should be activated. When
it stops, rotation direction should be automatically changed. ( after 6 seconds, even if it rotates in
reverse, the direction should be automatically changed )
This feature does not support brushed motor.
10. Reverse Delay
INC
Reverse Function
0.2 s S less
This feature is to set delay time when direction is changed from forwarder to reverse.
-
11. M-Reverse Amount
INC
M-Reverse Amount
100% S_less
- This is to set the max power amount which is delivered when reverse mode is activated in Two Way.
DEC
Set Off / 1%~100% using INC & DEC buttons.
DEC
Set Off / 1%~100% using INC & DEC buttons.
DEC
Set One way or Two way using INC & DEC buttons.
DEC
Set 0.2s / 0.5s / 0.8s / 1.3s / 1.8s / 2.5s using INC & DEC buttons.
DEC
Set 20% ~ 100% using INC & DEC buttons.