Setting Up The Anynet+(Hdmi-Cec) - Samsung DVD-FP580 Mode D'emploi

Setting Up the Anynet+
(HDMI-CEC) (DVD-F1080 only)
Anynet+ is a function that can be used to operate
the unit using a Samsung TV remote control, by
connecting the DVD-F1080 to a SAMSUNG TV
using a HDMI Cable. (see page 12) (This is only
available with SAMSUNG TVs that support
Anynet+).
Select On when you connecting the DVD-F1080
with Samsung TV that support Anynet+.
1. With the unit in Stop mode, press the MENU button.
2. Press the œ œ /ƒ ƒ buttons to select Setup, then press the ‹
or ENTER button.
3. Press the œ œ /ƒ ƒ buttons to select Anynet+(HDMI-CEC),
then press the ‹ or ENTER button.
4. Set the Anynet+(HDMI-CEC) to "On" on your DVD Player,
then press the ‹ or ENTER button.
5. Set the Anynet+ function at your TV. (See the TV instruction
manual for more information.).
• When you press Anynet+ button on the TV remote
control, the below OSD will appear.
30
‹ ‹
Language Setup
‹ ‹
Audio Setup
‹ ‹
Display Setup
‹ ‹
Parental Setup :
‹ ‹
DivX(R) Registration
Anynet+(HDMI-CEC):On
Enter Return Menu
‹ ‹
Language Setup
‹ ‹
Audio Setup
‹ ‹
Display Setup
‹ ‹
Parental Setup :
‹ ‹
DivX(R) Registration
Anynet+(HDMI-CEC):On
Enter Return Menu
‹ ‹
Language Setup
‹ ‹
Audio Setup
‹ ‹
Display Setup
‹ ‹
Parental Setup :
‹ ‹
DivX(R) Registration
Off
√ On
Anynet+(HDMI-CEC):On
Enter Return Menu
DVDP
View TV View TV
® ®
Select Device ®
®
Record
Menu on Device
®
Device Operation
®
Receiver : Off
®
Setup
®
Move ENTER
Exit
TV Menu
Note
To make the Setup menu disappear, press the
MENU button.
• You can operate the DVD Player by using TV
remote control. (TV buttons that can be used to con
trol the DVD Player :
, , ,and
buttons.).
- Select Device : Use this option to select device.
- Menu on Device : Same as MENU button on the
DVD Player remote control.
- Device Operation : Same as INFO button on the
DVD Player remote control.
Note
• By pressing the PLAY button of the unit while watch-
ing TV, the TV screen will change to the play screen.
• If you play a DVD when the TV power is off, the TV
will power On.
• If you turn the TV off , the DVD Player will power
off automatically.
• If you change the HDMI to other sources
(Composite,Component,... etc) in TV while play
ing the DVD disc, the DVD Player will stop play
ing.
, , , ,
buttons,