Bowers & Wilkins PI7 Mode D'emploi page 6

7. Wearing Your Headphones
Wearing your headphones correctly will help
ensure you get the best possible experience, see
Diagram 6. Like many in-ear earphones, PI7 earbuds
are designed to seal the ear canal in order to
perform optimally. Ear tips come in three sizes (small,
medium and large). Finding the proper size for your
ear is critical to obtaining a good seal and ensure
PI7, and the advanced features such as Adaptive
Noise Cancellation, perform optimally.
1. Identify the left and right earbud by finding the
L and R identification located on the inner side
on each earbud.
2. Place the earbuds in your ear and twist the
ear bud backwards slightly so that the tips
engages comfortably with the opening of the
ear canal.
3. If the earbud tip feels to large or small try
another size ear tip to ensure the best
possible fit.
Note: To optimise call quality, please ensure the
microphone located underneath the earbud is
facing outward, see Diagram 6.
8. Media Streaming
8.1 Connecting your case to media source with
the supplied USB type-C-to-3.5mm or USB
type-C-to-C Cable for media streaming, see
Diagram 7.
1. Connect the supplied cable to the case and the
source device.
2. Your PI7 will automatically start streaming.
Note: For Mac user, for the 1st time streaming,
go to output control under Sound Setting and
select "Bowers & Wilkins PI7"
8.2 Pairing secondary/subsequent headphone
(ONLY Bowers & Wilkins) to the case for
media streaming, see Diagram 8.
Your case can also pair with another Bowers &
Wilkins Headphone for media streaming
1. Connect the supplied cable to the case and the
source device.
2. Press and hold the outside button for
3 seconds until the LED flashing blue light.
3. Switch the headphone into pairing mode.
4. The case LED will change to a solid blue light
to indicate the connection completed.
5. Once paired, Press the external case button:
- 1x to START the streaming
- 2x to STOP the streaming
Note: Both earbuds have to be inside the case
while using the secondary headphone. Once
the subsequent headphone is paired, the paired
history will be deleted.
Diagram 6
Wearing your headphones
Diagram 7
Media streaming
Connect the case to the source.
Solid blue light once paired.
Diagram 8
Secondary / subsequent headphone streaming
Hold the button for 3 seconds/
Flashing blue light.
Press the button 1x to start, 2x
to stop.
Secondary/Subsequent
Headphone in pairing mode.
6