Cleaning - Bartscher 100201 Mode D'emploi

6. Cleaning

WARNING!
Disconnect the unit from the power supply (unplug!)
before cleaning. Allow it to cool down.
Never use water jet to wash the device.
Make sure that no water gets into the device.
CAUTION!
Use only non-abrasive cleaning agents. Abrasive cleaning agents may scratch
the toaster surface leading to deterioration of its appearance, and dirt will stick
to it more easily.
Never use abrasive cleaners, steel wool, metal objects, disinfectants or solvents
for cleaning the appliance.
Cleaning
o Clean the device regularly.
o Remove the bun warmer, clean it with a damp cloth and dry it properly afterwards.
o Remove the crumb drawer, empty it and clean it with a moist cloth. Then wipe them
dry thoroughly.
o Rotate the device by 180 ° and shake it lightly, t o remove bread crumbs from the
interior. Never poke around with any sharp objects in the toast slots, in order to
remove bread crumbs.
o Housing should be cleaned with soft damp cloth and dried with cloth or paper towel.
o Permanent stains may be removed with the cleaning agent for stainless steel or non-
abrasive cleaning agent.
o Allow the appliance and crumb drawer to dry for some time in the air before you insert
the crumb drawer and put the device back into operation.
- 35 -