Bartscher 100201 Mode D'emploi page 27

•
Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.
•
The supply cable must be disconnected from the socket only
by pulling the plug.
•
Never carry or lift the device by the supply cable.
•
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
•
Do not insert tools, cutlery into the device. Contact with metal
parts may cause short circuits and electric shocks. In addition,
the heating elements and the mechanism may be damaged.
•
Never immerse the appliance, the power cord and the power
plug in water or other liquids; do not put it under running water
and clean any parts of the appliance in the in the dishwasher.
•
Do not use any acid agents and make sure no water ingresses
the device.
•
Never operate the device with moist hands or standing on wet
floor.
•
Disconnect the device from the electric power supply.
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-
- 23 -