Special Function: Auto1 (Cook 500G Potatoes); Special Function: Auto 2 (Slow Boiled / Stewed Dishes); Special Function: Auto 3 (Mashed Potato); Memory Function - Kuppersbusch M6120.0 Mode D'emploi

Special function:
potatoes)
1. Put the potatoes (approx. 500g) with some
water in a heat resistant container and
place it on the rotating plate in the
microwave.
2. Press the PROGRAM KEY «P» (1). Select
the «AUTO 1» function by by pressing the
- / + KEYS (8). Confirm the function by
pressing the PROGRAM KEY «P» (1)
again.
3. Press the START key (4). The microwave
starts to function and the screen displays
the remaining operating time.
Special function: Auto 2 (slow boiled /
stewed dishes)
1. Place the ingredients
boiled/stewed (e.g. cabbage, chicken
stew) in a bowl, cover the bowl and place
on the oven‟s tray.
2. Press the PROGRAM KEY «P» (1). Select
the «AUTO 2» function by by pressing the
- / + KEYS (8). Confirm the function by
pressing the PROGRAM KEY «P» (1)
again.
3. Press the START key (4). The microwave
starts to function and the screen displays
the remaining operating time.
4. Turn the foods around at the moment the
microwave beeps and starts to flash on
36
Auto1 (cook 500g
to be slow
the screen: «TURN». Close the door
again and press the START key (4).

Special function: Auto 3 (mashed potato)

1. Prepare the mashed potato using 1 kg of
raw potatoes. Place the mashed potato
in a suitable container (25-26 cm in
diameter) and then place it on the micro-
oven tray.
2. Press the PROGRAM KEY «P» (1). Select
the «AUTO 3» function by by pressing the
- / + KEYS (8). Confirm the function by
pressing the PROGRAM KEY «P» (1)
again.
3. Press the START key (4). The microwave
starts to function and the screen displays
the remaining operating time.

Memory Function

The «MEM» function allows a range of
frequently used parameters (time and power)
to be stored in the memory. Nevertheless,
you may only use it with the main functions:
Microwave, Grill and Microwave + Grill.

Memory storage procedure

1. Press the PROGRAM KEY «P» (1). Select
the desired function (eg. MICROWAVE)
by by pressing the - / + KEYS (8).
Confirm the function by pressing the
PROGRAM KEY «P» (1) again.
2. Set the desired parameters (duration and
power) as described
functions.
3. Press the PROGRAM KEY «P» (1) until
you hear a beep and the DISPLAY (7)
displays the word «MEM».

Memory use procedure

1. Press the PROGRAM KEY «P» (1). Select
the «MEM» function by pressing the - / +
KEYS (8). Confirm the function by
pressing the PROGRAM KEY «P» (1)
again.
2. Press the START key (4). The microwave
starts to function.
in the basic