❑
Product Servicing
If the suggestions in the charts do not solve the problem,
we recommend that you take it to your nearest authorized
Panasonic Servicenter. The product should be serviced
only by a qualified technician.
❑
Replacing the Fuse
Use fuses of the same specified rating (15 A). Using dif-
ferent substitutes or fuses with higher rating, or connect-
ing the product directly without a fuse, could cause fire or
damage to this unit.
If the replacement fuse fails, contact your nearest
Panasonic Servicenter for service.
Maintenance
❑
Caution on Cleaning
Alcohol
Alcohol
Thinner
Thinner
Benzine
Benzine
Your product is designed and manufactured to ensure a
minimum of maintenance. Use a dry soft cloth for routine
exterior cleaning. Never use benzine, thinner or other sol-
vents.
Pesticide
Pesticide
Wax
Wax
❑
If the Unit Begins to
Malfunction...
Reset switch
Insert a hard, slender stick into the hole and push the
switch.
Important
Push the switch only when the unit fails to operate with
any buttons. (Stored settings and adjustments are not
cleared.)
If the unit fails to return to normal condition, call the near-
est Panasonic Servicenter and ask for repairs.
SRC
MENU
VOL
MUTE
P-MODE
ASPECT
ASP
TILT
Reset switch
Note:
¡ If the ID-CODE has been already set, you will be asked to
enter the ID-CODE right after the unit is restarted.
❑
Cleaning this Unit
When the unit is dirty, wipe the surface of the display
using the Wiping Cloth (supplied).
Cleaning without the supplied cloth
1
Moisten the soft cloth in dishwashing
soap diluted with water and wring well.
2
Wipe lightly. Go over the same surface
with a dry cloth.
Note:
¡Since there is the possibility of water drops getting
inside of the unit, do not directly apply cleanser to the
surface.
¡Do not scratch the screen with your nails or other hard
objects. The resulting scratches or marks will obscure
the images.
Caution
¡If water drops or similar wet substances get inside
the monitor, it may cause a malfunction.
46
CQ-VD6503U
47
CQ-VD6503U