Advanced Bionics Sky CI M90 Mode D'emploi page 31

4. For recipients using the 3D Magnet, the magnet should be inserted
so that the arrow on the magnet points up when the headpiece is on
the head.
5. Attach a color cap (See "Color Caps" section).
6. Attach the headpiece and cable to your sound processor
(See "Cables" section).
7. Then place the bottom side of the headpiece over the internal
magnet of your cochlear implant.
NOTE: For recipients of HiRes Ultra 3D implants, if the headpiece
repels or pushes away when brought over the internal device, rotate
the headpiece back and forth as you move the headpiece closer
towards the implant. Once attraction is felt, adjust the headpiece to
the original orientation and place on head.
NOTE: For recipients of HiRes Ultra 3D implants, when in a
magnetic field or when the headpiece is removed, you may feel
the internal components of the magnet vibrate and/or rotate. This
movement is expected as the magnets are designed to rotate in
the presence of strong magnetic fields. This movement may be
noticeable and is not expected to be uncomfortable.
Cables
Slim HP, Slim HP Mic, and Slim HP AquaMic have cables that are
integrated into the headpiece.
Attaching the Slim HP cable to the sound processor
To attach the Slim HP cable to the sound processor, hold the headpiece
cable by the cable's strain relief. Align the connector on the cable with
the connector on the sound processor and gently push the cable into
the sound processor until it snaps into place.
29