Advanced Bionics Sky CI M90 Mode D'emploi page 29

Masquer les pouces Voir aussi pour Sky CI M90:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
the base of each charging port, as well as where the power cable enters
the charger. If the light near the power jack is lit and green in color, it
means the charger is connected to a power source and ready to charge
the M Batteries. If the light near the power jack is lit and red in color, this
indicates a fault condition.*
The LEDs located at the base of each charging port have 3 color
options:
Blue: M Battery is charging�
Green: M Battery is fully charged�
Red: Fault condition�*
*Try to reinsert the power cable or M Battery. If the red LED illuminates
again, contact your cochlear implant professional.
The charger has an automatic dimmer. The brightness of the LEDs may
vary depending on the brightness of the room in which the charger is
placed.
Inserting the M Batteries into the charger
Locate the slide tracks on the charger. Position the M Battery so that
the battery contact is facing down toward the base of the charger and
aligned with the tracks on the charger.
Slide the M Battery along the tracks until it engages. The charger is
designed so the M Batteries can only be inserted in one direction.
27

Publicité

Table des Matières
loading

Table des Matières