BADU OmniTronic Traduction Du Instruction D'utilisation Originale page 68

Description
16 EN
The following controls/messages can be
set in the Settings relay z7-z8 menu:
• Heating control
• Solar control
• Frost protection
• Error message
The appropriate parameters and limits
must be entered accordingly.
In the Service menu, information
regarding the next backwash, last
backwash, last drain, last circulation, last
off and the operating times of the various
speeds can be found.
The number of backwashes and refilling is
also displayed. The current temperature
(min/max) of the previous day is also
displayed. The number of switchings of
heating, solar and frost protection can
also be read here.
04|2019