Switching Off The Terminal; Configuring The Terminal - MVG Neptu Link Manuel Utilisateur

Ensure that the Ethernet connection
terminal block is fully screwed in.
Do not twist or damage
the Ethernet cable.
Do not use damaged Ethernet cables
or plugs.
Do not use the standard power cord.
Connect the Data port on your PoE injec-
➍
tor to the Ethernet port on your computer
or router.
Switch on your PoE injector.
➎

SWITCHING OFF THE TERMINAL

To switch off the terminal
• Standard configuration: unplug the power
cord by unscrewing the screws on the
2-point terminal block.
• PoE configuration: switch off the PoE
injector by unplugging its power cord.

CONFIGURING THE TERMINAL

Follow the instructions below to configure
and test the 4G connectivity.
Your computer must be configured
for DHCP. For instructions on DHCP
configuration, please refer to your
computer documentation or see
the Appendix
"
for DHCP .
Switch your computer on if it is off.
➊
The terminal will automatically assign
an IP address to your computer.
Type the URL http://neptulinkV2.lan
➋
the address field of a browser such as
Microsoft Internet Explorer, Google Chrome
or Mozilla Firefox.
The following login box will appear:
➌
Type in "root" as the user name and "Admin29"
as the password.
Click the Login button to proceed to the termi-
nal's administration interface.
You can configure your terminal to connect to
Internet through a 4G or Wi-Fi connection.
"
Configuring your computer
into
EN
11