Start Up Instructions - Garland 780 QG Manuel D'instructions

English

6. START UP INSTRUCTIONS

6.1. UNPACKING AND LIST OF MATERIALS
Carefully inspect the product to ensure that there are
no damaged elements. If you find any damaged or
missing parts, do not use the machine until the defect
has been repaired or all the missing pieces replaced.
Using the machine without all of its parts or with
defective parts can cause severe personal injury.
6.2. ASSEMBLY
6.2.1. MOUNTING OF THE WHEELS AND TRANSPORT
HANDLE
Transport handle
Wheels
insert the wheels in the order shown in the diagram
and tighten the screw
Cap
Place the front protector as shown in the diagram and
tighten the two screws
6.2.2. MOUNTING THE CHUTE AND EXIT TUBE
Place the chute and exit tube
32/160
Wheel screw with washer
fig. 1