Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY, ASSEMBLAGE, ENSAMBLAJE
7
6
5
8
9
CLEANING & STORAGE GAS COOKER STAND
• ALWAYS MAKE SURE UNIT IS COOL TO THE TOUCH BEFORE CLEANING AND STORING.
• Simply wipe down the unit with a damp cloth after each use to keep in proper working condition.
• Do not use a cleaning agent. Make sure to dry thoroughly.
• If any rusting occurs , use steel wool to clean and buff affected area.
• The exterior of the unit may be touched up with high temperature-resistant paint.
• Store only when fire is completely out and all surfaces are cold.
• After cleaning store cooker stand in covered dry area.
When a flame occurs inside the venturi this is caused by a blockage and could cause
damage to the hose assembly.
TO CLEAN BURNER:
1. Remove the hose from the burner using a 7/16" wrench.
2. Insert a small rod in the hole that the hose was removed from.
3. Hold the burner up to a light looking into the hole that the hose was removed from to see any
obstructions.
4. If burner has not cleared, flush with water and dry completely.
5. O nce the burner has been cleared, reassemble the burner (air shutter, spring, hose.)
26
Publicité
