Marshalltown BULLET 220-SSTDC Mode D'emploi page 6

Step 4 – Attach the Table Assembly (A) to the top of the base using
Machine Screw (L) in the holes closest to the Power Assembly (B) and
Machine Screws (K) in the holes closest to the carrying handle
Step 5 – Attach the Handle Assembly (E) to the Power Assembly (B)
using Hex Bolts (I)
Step 6 – Insert the Handle Extension (F) into the Handle Assembly (E)
by pressing the button on the bottom of the Handle Extension
Step 7 – (For 20" Shear) – Place the Fence (O) in the holes on either
side of the shear
(For 26" Shear) – Place the Fence (O) in the grooves on the Table
Assembly (A) and tighten the knobs
6 of 48
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
ASSEMBLY
20" Shear
26" Shear
WS2647