What To Do If - IKEA FRAMTID Mode D'emploi

ENGLISH
Stainless steel elements wash with water,
and then dry with a soft cloth.
This model is equipped with electrical igni-
tion, it is obtained through ceramic "candle"
with electrode.
Keep them well clean to avoid difficult light-
ning.
The pan supports are not dishwasher proof;
they must be washed by hand. After clean-
ing, make sure that the pan supports are
correctly positioned.
To make burners work correctly, make sure
that the arms of the pan supports are in the
centre of the burner.
220mm 240mm

What to do if...

Problem
There is no spark when
lighting the gas
supply pipe and the pressure adjuster, if it is
fitted (this service is not free of charge).
After cleaning, be sure to wipe dry with a
soft cloth.
Possible cause
There is no electrical supply
There is no electrical supply
Burner cap and Crown are
placed uneven
Periodically ask your local Service Cen-
tre to check the conditions of the gas
Check that the unit is plug-
ged in and the electrical
supply is switched on.
Check the house electric in-
stallation fuse.
Check the burner cap and
crown have been replaced
correctly, e.g. after cleaning.
8
Remedy