Luvion GRAND ELITE 3 CONNECT Manual D'instructions page 23

LUVION
setuP
1. camera en monitor setuP
1.1 Power supply camera
Plug one end of the provided power adapter into a wall outlet and the other end
into the back of the camera. Camera automatically turns on when plugged in(see
Fig. 3).
note: Use the adapter labelled OUTPUT: 5V DC 2.0A for the camera.
1.2 Placing the camera
Place the camera in a convenient location, point the lens toward the observation area.
note: Don't turn the camera manually! Rotating the camera head should only be done
through the menu of the monitor(see Fig 11).
1.3 Night vision
The camera is equipped with 8 high-intensity LEDs to create clear images in the dark.
When the light sensor detects low ambient light levels, the LEDs are automatically
activated.
1.4 room temperature measurement
The temperature sensor measures the room temperature on the camera side, the tem-
perature will be displayed on the screen of the monitor.
1.5 Power supply monitor
The monitor has a built in 3.7V 2600mAh (Li-ion) battery and uses household AC power
current.
1.
Plug one end of the provided power adapter into a wall outlet and the other end
into the monitor (see Fig. 4).
2.
Slide the power switch to 'ON' (see Fig. 4).
note 1: Use the adapter labelled OUTPUT: 5V DC 1.0A for the monitor.
note 2: When there is power on the monitor, the "Power" LED will light up green.
When the battery is low, the "Power" LED will start blinking red.
When the battery is charging, the "Power" LED will be continually red.
Once the battery is fully charged, the "Power" LED will turn off (if the monitor is turned off)
note 3: "
and camera are too far apart.
2. monitor Buttons
2.1 Volume setting
Press volume up or volume down
2.2 talkback function
Press and hold the talk back button
icon will be displayed on the screen (see Fig. 6)
Premium Baby products
" (out of range) will be displayed on the LCD screen if the monitor
to speak through the camera unit, the
to adjust the volume level. (see Fig. 5)
23
en