SilverCrest 245014 Mode D'emploi page 4

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces of
oil and other lubricants. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
4
Original Instructions
Specification
Fluid type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compressed air
Maximum operating pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10bar (145psi)
Adjustable outlet pressure range: . . . . . . . . . . . . . . . . . . . . . . . 0.5 - 8.5bar (7-123psi)
Operating temperature range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 50°C
Air connections: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G ¼"
Condenser bowl capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150ml
Oil bowl capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250ml
Condenser/oiler bowl material: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polycarbonate
Recommended lubricant: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ISO VG 32 air tool oil
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
General Safety Warnings
• For multiple hazards, read and understand the safety instructions before installing, operating,
repairing, maintaining, changing accessories on, or working near this device. Failure to do so can
result in serious bodily injury
• Only qualified and trained operators should install, adjust, or use this device
• Do not modify this device. Modifications can reduce the effectiveness of safety measures and
increase the risks to the operator
• Do not discard the safety instructions; give them to the operator
• Do not use this device if it has been damaged
• Tools shall be inspected periodically to verify that the ratings and markings required by this part
of ISO 11148 are legibly marked on the tool. The employer/user should contact the manufacturer
to obtain replacement marking labels when necessary
WARNING: This appliance is not intended for use by persons (including children) with reduced,
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
Projectile Hazards
• Be aware that failure of this device can generate high-velocity projectiles
• Always wear impact-resistant eye protection during operation of this device. The grade of
protection required should be assessed for each use
• The risks to others should also be assessed at this time
• Ensure that the device is securely fixed
Workplace Hazards
• Slips, trips and falls are major causes of workplace injury. Be aware of slippery surfaces caused by
use of the tool and also of trip hazards caused by the air line or hydraulic hose
• This tool is not intended for use in potentially explosive atmospheres and is not insulated against
contact with electric power
Additional Safety Instructions for Pneumatic Devices
Air under pressure can cause severe injury:
• Always shut off air supply, drain hose of air pressure and disconnect tool from air supply when
not in use, before changing accessories or when making repairs
• Never direct air at yourself or anyone else
• Whipping hoses can cause severe injury. Always check for damaged or loose hoses and fittings
• Whenever universal twist couplings (claw couplings) are used, lock pins should be installed and
whipcheck safety cables should be used to safeguard against possible hose-to-tool or hose-to-
hose connection failure
• Do not exceed the maximum air pressure stated on the tool
• Never carry an air tool by the hose