Hilti WSR 36-A Mode D'emploi Original page 12

3.4 Lithium­ion battery status display
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge state of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights.
1 LED blinks.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.
3.5 Items supplied
Reciprocating saw, saw blade, operating instructions.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.group
3.6 Stroke rate setting
Material to be cut
Wood
Wood containing nails
Interior finishing, drywall
Plastic
Steel
Non-ferrous metals
Aluminium
Stainless steel
4 Technical data
4.1 Reciprocating saw
Rated voltage
Weight
Stroke rate
Stroke
Keyless chuck for standard accessory tools
6 English
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
Suggested stroke rate settings
5-6
5-6
3-4
3-4
2-3
2-3
2-3
1
WSR 36­A
36 V
9.63 lb
(4.37 kg)
0 /min ... 2,850 /min
1.3 in
(32 mm)
1/2 in
214008
*214008*