sauermann SI-CA 030 Guide Rapide page 4

2 Analyzers description
1
2
3
4
5
6
3 Operating temperature, protection of the instruments and information about storage
• Operating temperature: from -5 to 45 °C (23 to 113 °F)
• Protection: IP42
If the instrument is stored outside the operating temperature (for example in a van, a
warehouse,...) please let the analyzer acclimate to room temperature for at least 15 minutes
before starting and operating the analyzer.
If the ambient temperature is lower than 10 °C (50 °F), the analyzer should be acclimated
to ambient temperature before performing measurements.
4 First start-up
DO NOT insert the gas probe in the flue/chimney/stack.
Keep pressed for 3 seconds to turn on the analyzer.
Press Down key to
go to "Start" then
press OK.
1. Min-DIN connection for CO and CO
probe
2. Thermocouple connection for air
7
temperature
3. Thermocouple connection for flue gas
temperature
4. P- connection
5. P+ connection
6. Gas connection
7. USB connection
Select your country
pressing Up and
Down keys and
validate with OK.
Select your
Set the date pressing
language pressing
Up and Down keys
Up and Down keys to
and validate with
select the correct item
OK.
and validate with OK
2
OK on each line, use
then go to "Next".