Signals And Alarms; Signals; Alarms; Environmental Aspects - Blakeslee D-19 L Notice D'installation, D'emploi Et D'entretien

8. SIGNALS AND ALARMS

8.1 Signals

The signals messages are displayed, based upon their meaning.
When on the display appears
with the optional "Chemicals level Sensor").
When on the display appears
with the optional "Chemicals level Sensor").
When on the display appears
Hood or that you opened the Hood, interrupting a cycle in progress.
When on the display appears
done with the wash tank full.
When on the display appears
requires a self-washing cycle.
When on the display appears
cycle.

8.2 Alarms

The alarm messages are displayed, based upon their meaning.
TYPE OF ALARM
B1
B2
B3
B4
B5
E1
E2
E3
E5
E6
Z10
table 3

9. ENVIRONMENTAL ASPECTS

9.1 Packaging

Packaging is made of the following components:
•
•
•
•
•
All above materials, shall be disposed and treated in accordance with the Local Laws in force.

9.2 Disposal

The machine must be disposed of according to current regulations: contact the Municipalized Firm responsible
for collection of urban solid waste.
Before disposing of the appliance, disconnect all water and electrical connections.
Cut the electrical cable in such a way as to prevent further use.
As all metal parts are stainless steel, they are therefore recyclable.
Recyclable plastic parts are identifi ed by the plastic symbol.
DETERGENT LEVEL
RINSE-AID LEVEL
SHUT HOOD it means that you are trying an operation that cannot be done with the open
DRAIN WATER IN WASH TANK
SELF-CLEANING: REMOVE FILTERS AND PRESS START
SELF-CLEANING CYCLE OVER
CAUSE
BOILER FILLING FAIL
BOILER PROBE FAIL.
BOILER HEAT. ALARM
RINSING FAILED
BOILER OVERHEATING
WATER LOAD FAILED
TANK PROBE FAIL.
TANK HEATING ALARM
TANK OVERHEATING
TANK DRAINING FAIL.
ALARM SL8 - BREAK TANK HIGH LEVEL
a wooden pallet
a nylon sack (LDPE)
a multi-layer carton
polystyrene (PS) strips
polypropylene (PP) banding.
it means that the detergent level is low (only on machines equipped
it means that the rinse-aid chemical level is low (only on machines equipped
it means that you are trying an operation that cannot be
it means that the machine has concluded its self-washing
it means that the machine
REMEDIES
Open the water supply valve and check the
overfl ow pipe
Contact Technical Service
Contact Technical Service
Contact Technical Service
Contact Technical Service
Open the water supply valve and check if the
overfl ow pipe is taken off
Contact Technical Service
Contact Technical Service
Contact Technical Service
Check if the overfl ow pipe is taken off . Contact
Technical Service
Contact Technical Service
USA
page 39