Extraordinary Maintenance - By Qualifi Ed Service Personnel - Blakeslee D-19 L Notice D'installation, D'emploi Et D'entretien

USA
• Remove the fi lter and clean with a brush and a water shower. Drain the water by removing the overfl ow pipe (see pict.
14).
For machines equipped with drain pump, follow all indication at par. 4.5.
• Remove the pump fi lter and clean with a brush and a water shower (see pict. 15).
• Remove the arms by loosening the fi xing screws, and thoroughly clean them, and the nozzles under running water (see
pict. 16).
1
2
pict. 14
• Reassemble the parts and reposition the wash pipes fi rmly in place. Take extreme care to re-assemble the nozzles in
the right position (open and / or closed nozzles) and that the arms are installed with the right axial angle.
• Clean the tank very carefully, using a water shower.
• It is recommended to leave the machine hood open at the end of the day.
• Automatic cycle of machine self-cleaning/rinsing:
The machine should be in
hood (see pict. 17 and 18). For machines equipped with drain pump, follow all indication at par. 4.5.
STAND-BY
Push START button A; an automatic cycle of 30 seconds will start, after this the machine will be in
• Shut the water valve.
• Turned off the machine by switching the main power switch OFF (see pict. 19).
7.2 Extraordinary Maintenance – by qualifi ed Service Personnel
At least once per year, the machine should be supervised by qualifi ed Service Personnel:
1 Clean the solenoid-valve(s) fi lters.
2 Remove scale from the heating elements.
3 Control the status of the seals.
4 Control for components integrity and/or consumption.
5 Control the dispenser(s) effi ciency;
6 Check the effi ciency of the door safety switch.
A qualifi ed electrician, should check all electric connections inside the machine, at least once a year.
page 38
pict. 15
STAND-BY mode. Remove the overfl ow pipe. Wait the tank to be totally empty and close the
2
STAND-BY
pict. 16
recommended at each day end.
1
pict. 17 pict. 18
STAND-BY mode.
pict. 19