Brandson Equipment 304996 Mode D'emploi page 23

5. Usage
Keep the fan in an appropriate location and connect the device to a properly in-
stalled power socket.
Press the "POWER" button on the remote control or on the fan to switch the fan
on. Press and hold the button for 3 seconds to switch the signal trough on or off.
Press the "OSC" button on the remote control or on the fan to enable the oscilla-
tion. Press the "SPEED" button on the remote control or on the fan to adjust the
speed of the fan. Press the "TIMER" button on the remote control or on the fan to
turn on the timer function.
Press the "MODE" button on the remote control or on the fan to change between
different modes. If you hold this button for 3 seconds, the display will switch
off. Press the "DISPLAY" button on the remote control in order to switch off the
display.
English
Key Function
Switches the device on
POWER
or off
SPEED Changes the speed level
of the fan
MODE Changes the mode of
the fan
TIMER Turns the timer function
on.
OSC Turns the oscillation on
or off
DISPLAY Turns the display on or off
MUTE Switches the signal tones
on or off
23