External Control Device Setup - LG Digital Signage 60UL3E Guide De Configuration Rapide

EXTERNAL CONTROL DEVICE SETUP

* Image shown may differ from your monitor.
* Cable is not provided.
* The connection interface may differ from your Signage.
RS-232C Setup
USB to Serial converter with USB Cable
USB Type
(PC)
• LG signage supports PL2303 chip-based (Vendor ID : 0 x 0557, Product ID : 0 x 2008) USB to serial converter which
is not made nor provided by LG.
(PC)
• It can be purchased from computer stores that carry accessories for IT support professionals.
RS-232C with RS-232C Cable
(PC)
DE9 (D-Sub 9pin) Type
(PC)
(PC)
(PC)
• You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to RS-232C cable required for the
connection between the PC and the signage, which is specified in the manual.
(PC)
• The connection interface may differ from your signage.
1
3
(STB)
4
2
(PC)
1
3
(STB)
• Connect the USB to Serial converter/RS-232C input
jack to an external control device (such as a computer
or an A/V control system) to control the product's
functions externally.
• Connect the serial port of the control device to the
RS-232C jack on the product back panel.
NOTE
• The type of control port on the monitor can be
different between model series.
RS-232C IN
(CONTROL & SERVICE)
1
3
2
RS-232C IN
(CONTROL & SERVICE)
1
3
RS-232C IN
4 1
(CONTROL & SERVICE)
3 2
1
2
3
RS-232C IN
4
(CONTROL & SERVICE)
1
2
3
RS-232C IN
4
(CONTROL & SERVICE)
2
RS-232C IN
(CONTROL & SERVICE)
1
3
(TV)
(Signage)
(TV)
(TV)
(TV)
(TV) (Signage)
(TV)
(TV)
(TV)
(TV)
(TV)
19