LG Digital Signage 60UL3E Guide De Configuration Rapide page 14

Lifting and Moving the
Monitor
When moving or lifting the monitor, read the following
to prevent the monitor from being scratched or
damaged and for safe transportation regardless of its
type and size.
• It is recommended to move the monitor in the box
or packing material that the monitor originally came
in.
• Before moving or lifting the monitor, disconnect the
power cord and all cables.
• When holding the monitor, the screen should face
away from you to avoid damage.
• Hold the top and bottom of the monitor frame
firmly. Make sure not to hold the transparent part,
speaker, or speaker grille area.
• Use at least two people to move a large monitor.
• When transporting the monitor by hand, hold the
monitor as shown in the following illustration.
6
• When transporting the monitor, do not expose the
monitor to jolts or excessive vibration.
• When transporting the monitor, keep the monitor
upright; never turn the monitor on its side or tilt
towards the left or right.
• When handling the monitor, be careful not to
damage the protruding buttons.
• Avoid touching the screen at all times, as this
may result in damage to the screen.
• Do not place the product on the floor with
its front facing down without padding.
Failure to do so may result in damage to the
screen.
• Do not move the monitor by holding the
cable holders, as the cable holders may
break, and injuries and damage to the
monitor may occur. (Depending upon
model)
• When attaching the stand to the monitor
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.