Optional Extras; Wall Mounting Bracket - LG Digital Signage 60UL3E Guide De Configuration Rapide

Preparing
• When the monitor is turned on for the first time after
being shipped from the factory, initialization of the
monitor may take approximately one minute.
• Image shown may differ from your monitor.
• Your monitor's OSD (On Screen Display) may differ
slightly from that shown in this manual.
• The available menus and options may differ from the
input source or product model that you are using.
• New features may be added to this monitor in the
future.
• The device must be easily accessed to a location
outlet near the access. Some devices are not made
by turning on / off button, turning off the device and
unplugging the power cord.
• The items supplied with your product may vary
depending upon the model.
• Product specifications or contents of this manual
may be changed without prior notice due to
upgrade of product functions.
• For an optimal connection, HDMI cables and USB
devices should have bezels less than 10 mm (0.39
inches) thick and 18 mm (0.7 inches) width.
• Use an extension cable that supports USB 2.0 if the
USB cable or USB flash drive does not fit into your
monitor's USB port.
• Use a certified cable with the HDMI logo attached.
If you do not use a certified HDMI cable, the screen
may not display or a connection error may occur.
• Recommended HDMI cable types (3 m (9.84 feet) or
less)
• High-Speed HDMI®/™ cable
• High-Speed HDMI®/™ cable with Ethernet
B
A A
• Do not use any unapproved items to ensure the
safety and lifespan of the product.
• Any damages or injuries by using unapproved items
are not covered by the warranty.
• Some models appear to have a thin film on the
screen. It is actually part of the screen; do not
remove it.
B
* A 10 mm
(0.39 inches)
* B 18 mm
(0.7 inches)

Optional Extras

Stand
Model
60UL3E ST-60UL3RB
70UL3E ST-70UL3DT
Optional extras can be changed or modified for quality
improvement without any notification.
Contact your dealer for buying these items.
These devices work only with certain models.
The model name or design may be changed due to
the manufacturer's circumstances or policies.

Wall Mounting Bracket

Make sure to use screws and wall mounts that meet
the VESA standard. Standard dimensions for the wall
mount kits are described in the following table.
A
B
Model
60UL3E
VESA (A x B)
300 x 300
Standard screw
M6
Number of screws
4
Wall mount bracket
OLW480B
(optional)
Stand
70UL3E
600 x 400
M8
4
LSW640B
5