Motorola IMPRES NNTN7584 Guide D'utilisation page 17

68009259001_Impres_DUC_EN.book Page 15 Tuesday, December 29, 2015 12:38 PM
IMPRES chargers automatically turn off at the end of a charge
cycle, yet continue to electronically monitor IMPRES batteries
every five minutes to determine when more energy should be
applied. This ensures the battery has a high state of charge without
sustaining any heat damage.
IMPRES batteries can be left in IMPRES chargers for extended
periods without heat damage. The charger monitors the batteries
so that they're charged and ready to go whenever you need them.
3. Eliminate the need to purchase reconditioning equipment and train
personnel to "manage battery maintenance tasks."
With IMPRES adaptive reconditioning, Motorola has made it easy
and automatic for you to maintain your battery inventory.
IMPRES chargers evaluate the actual usage pattern of every
battery to establish the optimal reconditioning interval.
Adaptive reconditioning makes it easy for battery maintenance
technicians to know the correct reconditioning intervals.
Unwarranted reconditioning cycles wastes battery cycles. Not
reconditioning often enough robs the user from being able to use
the full Potential Capacity of the battery.
4. Maximize operation time between charge cycles by automatically
minimizing memory effect in Nickel batteries.
Motorola's IMPRES chargers evaluate the actual usage pattern of
each IMPRES battery. This allows the charger to adapt to that
individual battery's usage pattern and establish the optimal
Reconditioning/Calibration interval for that battery. IMPRES uses
an adaptive algorithm, which relies on several factors to evaluate
the need for Reconditioning/Calibration. The system then
automatically Reconditions/Calibrates the battery as required. The
intelligence within the IMPRES system automates the process,
removing guesswork from determining the optimal Reconditioning/
Calibration interval.
15