Collomix Xo 55 R duo Manuel D'instructions D'origine page 6

Care and maintenance
► Before you carry out any operations on the machi-
ne, and especially when changing the mixing tool,
always pull out the power plug out first.
Clean the machine and the mixing tool immediately a昀琀er
use. We recommend that you use the Collomix MIXER
CLEAN cleaning bucket for cleaning.
Keep the HEXAFIX coupling clean
and freely moving at all 琀椀mes.
Take the mixing tool out of the
Fett
coupling a昀琀er you have 昀椀nished
Grease
your work.
Graisse
Grease the hexagon mount of the
Smar
coupling at regular intervals with
suitable grease.
Keep the ven琀椀la琀椀on slits clean and clear at all 琀椀mes
so that the machine can be properly cooled. Blocked
ven琀椀la琀椀on slits will lead to irreparable damage to the
machine.
Make sure that the ON/OFF switch moves and releases
smoothly at all 琀椀mes.
The machine is equipped with self-deac琀椀va琀椀ng carbon
brushes. This means that the machine will shut itself
down once a certain level of wear is reached. The carbon
brushes can be replaced by the authorized customer
service center or by the Collomix Service center.
Have repairs carried out only by an approved workshop
or by your Collomix Service.
Only use original Collomix accessories and replacement
parts.
For exploded drawings, lists of replacement parts
and the form for repair orders, please refer to:
h琀琀p://www.collomix.com
Disposal
The device, accessories and packaging should all be
consigned for environment-friendly recycling.
Electrical tools which have come to the end of their
service lives must be made unusable by removing the
mains power cable.
For EU countries only:
Do not dispose of electrical tools with household waste.
In accordance with EU Direc琀椀ve 2002/96/EC
concerned with used electrical and electronic
equipment and the incorpora琀椀on of the
requirements of the direc琀椀ve in na琀椀onal
legisla琀椀on, unusable electrical equipment
must be collected separately and consigned
for environment-friendly recycling.
Content
1x Mixing machine with Hexa昀椀x couplings
1x pair of mixing paddles MKD
1x Manual
1x General safety notes
Warranty
The manufacturer provides a warranty within the
framework of his terms and condi琀椀ons of delivery in
accordance with the requirements of statutory/country-
speci昀椀c provisions. Should you need to make a claim
under the warranty, please provide us with your invoice
or delivery note.
On no account will any warranty claims be accepted if
any repairs are carried out by third par琀椀es. In the event
of any irregulari琀椀es, please send the machine to us.
Complaints can only be accepted if the device is sent to
the Collomix Service center undismantled.
The warranty does not apply to damages caused
by normal wear, overloading, improper handling,
unsuitable accessories or inadequate maintenance.
Any structural or func琀椀onal modi昀椀ca琀椀ons to the
machine which are made without our agreement shall
render the warranty and the Declara琀椀on of Conformity
null and void.
Subject to change.
Serviceadress USA and Canada:
Collomix North America Inc.
648 Crescent Court
Milwaukee, WI 53213
Phone: 414 471 3883
Fax: 414 918 8032
E-Mail: al.karraker@collomix.com
www.collomix.us
Manufacturer:
Collomix GmbH
Daimlerstrasse 9
85080 Gaimersheim
Germany