Troubleshooting; Safety Notices; Causes And Rectification Of Faults - Caso Germany Master E4 Slide Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 73

16 Troubleshooting

16.1 Safety notices

16.2 Causes and rectification of faults

caso Master E4 Slide
Attention
► In order not to damage the plastic components, do not use
any solvent-based cleaning detergents such as, for example,
petrol.
► Do not use any flammable, acidy or alkaline materials or
substances near the device, as this may reduce the service
life of the device and lead to deflagration when the device is
turned on.
This chapter provides you with important notices with regard to
operating the device. Observe the following notices to avoid
dangers and damages:
Attention
► Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs on electrical
equipment.
► Improperly performed repairs can cause considerable
dangers for the user and damages to the device.
In the event of a fault, an error code will appear in the display; it
describes the cause of the fault. The following table assists in
localizing and rectifying minor faults.
Fault
Possible Cause
The induction
No power.
hob cannot
be turned on.
To Rectify
Make sure the induction
hob is
connected to the power
supply
and that it is switched on.
Check whether there is a
power
outage in your home or
area. If
you've checked
everything and the
68

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3040

Table des Matières