Makita MR002G Manuel D'instructions page 13

Stopping the alarm sound
To cancel a sounding alarm, press the Power button.
Disable the alarm setting
To disable the alarm setting before the alarm sounds,
press and hold the corresponding alarm button until alarm
symbol disappears on the display.
Snooze
1. When the alarm sounds, press any button other than
the Power button will silence the alarm for 5 minutes.
"SNOOZE" will appear on the display.
2. To adjust the silence time for the snooze timer, press
and hold the Menu/Info button to enter the menu
setting.
3. Rotate the Tuning control knob until "SNOOZE X"
appears on the display, then press the Tuning control
knob to enter the setting. Rotate the Tuning control
knob to adjust the silence time from 5, 10, 15 and 20
minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is
suspended, press the Power button.
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can be
adjusted between 60, 45, 30, 15, 120 and 90 minutes.
1. Press and hold the Power button to enter the Sleep
Timer setting. "SLEEP XX" will show on the display.
2. Keep holding the Power button and the Sleep Timer
options will start switching on the display. Stop until the
desired Sleep Timer setting appears on the display.
The setting will be saved and the LCD will return to
normal display.
3. Your radio will switch off automatically after the preset
Sleep Timer has elapsed. The Sleep Timer icon will be
shown on the display indicating an active Sleep Timer.
4. To cancel the Sleep Timer function before the preset
time has elapsed, simply press the Power button to
turn the unit off manually.
Loudness
You can get compensation on lower and higher frequency
for your radio by adjusting the loudness function.
1. Press and hold the Menu/Info button to enter the menu
setting.
2. Rotate the Tuning control knob until "LOUD ON" or
"LOUD OFF" appears on the display. Press the Tuning
control knob to enter the setting.
3. Rotate the Tuning control knob to choose ON to turn
on the loudness function, then press the Tuning control
knob to confirm the setting.
4. To turn off the loudness function, select OFF and press
the Tuning control knob to confirm the setting.
LISTENING TO MUSIC VIA
BLUETOOTH STREAMING
You need to pair your Bluetooth device with the radio
before you can auto-link to play/stream Bluetooth music
through the radio. Pairing creates a 'bond' so two devices
can recognize each other.
Note:
● To have the better sound quality, we recommend
setting the volume to more than two-thirds level on your
Bluetooth device and then adjust the volume on the
radio as required.
● The radio can memorize up to 8 sets of paired device,
when the memory exceed this amount, the oldest
pairing history will be over written.
Pairing your Bluetooth device for the
first time
1. Press the Power button to turn on the radio. Press the
Band button to select Bluetooth mode. The display will
appear "BT PAIR" and "PAIR" will flash on the display.
2. Activate Bluetooth on your device according to the
device's user manual to link to the radio. Locate the
Bluetooth device list and select the device named
'MR002G' (With some mobiles which are equipped with
earlier versions than BT2.1 Bluetooth device, you may
need to input the pass code "0000").
3. Once connected, there will be a confirmation tone
sound. "BLUETOOTH" will remain on the display and
the backlight will be dim-out in10 seconds. You can
simply select and play any music from your source
device. Volume control can be adjusted from your
source device, or directly from the radio.
4. Use the controls on your Bluetooth-enabled device or
on the radio to play/pause and navigate tracks.
Note:
● If 2 Bluetooth devices, pairing for the first time, both
search for the radio, it will show its availability on both
devices. However, if one device links with this unit first,
then the other Bluetooth device won't find it on the list.
● If your Bluetooth device is temporarily disconnected to
the radio, then you need to manually reconnect your
device again to the radio.
● If 'MR002G' shows in your Bluetooth device list but
your device cannot connect with it, please delete the
item from your list and pair the device with the radio
again following the steps described previously.
● Optimum Bluetooth streaming range is roughly 10
meters (33 feet) (line of sight) to the radio but distance
up to 30 meters (100 feet) are possible.
● If Bluetooth connection is lost due to exceeding time of
separation, exceeding the optimum distance, obstacles
or otherwise, reconnecting your device with the radio
may be necessary.
13 ENGLISH