5452160-Schlagbohr-man 15.01.14 09:26 Seite 31
The specified vibration emission value
was measured in accordance with a
standardised test procedure and can be
used in order to compare one electrical
tool with another.
The specified vibration emission value
can also be used for preliminary
evaluation of the disturbance.
CAUTION! The vibration
emission value may fluctuate
from the specified value during use of
the electrical tool. These fluctuations
will depend on the way in which the
tool is used.
Try to keep the vibration loads as low
as possible. Examples of measures
that may be taken to reduce the
vibration load include wearing gloves
when using the tool and limiting the
length of the working period. All parts
of the operating cycle must be taken
into account for this purpose (for
example, also including times in
which the power tool is switched off
and times in which it is switched on,
but is running without load).
3 – Components
1 Impact Drilling Switch
2 Reversing Switch
3 Lock-On Switch For Extented Use
4 Cable
5 Trigger with Electronic Speed Control
and Preselection of Speed
6 Front Handle
7 Drill Chuck
8 Depth Gauge
9 Additional Handle
All manuals and user guides at all-guides.com
4 – Correct use
Drilling in wood and metal, impact drilling
in concrete. Do not use machines, tools
and accessories for additional applications
(see manufaturer's instructions) for works
other than those for which they are
designed for. All other applications are
expressly ruled out.
The machine is intended only for use in
the household.
This unit may not be used by people
(including children) with reduced physical,
sensory or mental capacities, with a lack
of experience and without the appropriate
knowledge, unless they are supervised by
someone who is responsible for their
safety or have been instructed by such a
person with regard to how the unit is to
be operated. Children should be
supervised to ensure that they do not
play with the device.
accordance with manufacturer's
instructions. Any necessary repair must
be performed by qualified personal.
Improper use of the product
All applications carried out with the
device that are not listed in the "Proper
use" chapter will be considered
improper use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.
Just because you can affix an
accessory to your electrical tool, there is
no guarantee it is safe to use.
WARNING! The warranty is voided
by any improper use or use not in
31