Disassembling The Blender - Breville 800BLXL Mode D'emploi

FIG 7
If any moisture or liquid appears on top of the
motor base during blending, press the 'Power'
button on the control panel, switch off at the
power outlet and remove the power plug.
Remove the blender jug. Wipe the motor base
immediately with a dry cloth or paper towelling
to absorb the liquid. Check the blender jug is
correctly assembled.
FIG 8

DISASSEMBLING THE BLENDER

1. Always ensure the Breville Die Cast
Hemisphere Blender is switched off by
pressing the 'Power' button on the control
panel. Then switch off at the power outlet and
unplug the power cord.
2. Remove the blender jug from the motor base
by grasping the handle and lifting the jug in an
upward direction.
Remove the blade assembly by upturning
the blender jug and twisting the Blade
Removal System clockwise (see Fig 7),
then lift upwards and away from the base
of the blender.
3. Remove the silicon seal from the blade
assembly (see Fig.8).
HOW TO USE THE BREVILLE DIE CAST BLENDER
13