Safety Notes; Important Notes; Functions; Spare Parts - marklin 140 Serie Mode D'emploi

Safety Notes

• This locomotive is to be used only with an operating
system designed for it (Märklin AC, Märklin Delta, Märklin
Digital or Märklin Systems).
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one transformer.
• Pay close attention to the safety notes in the instructions
for your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive
is to be run in conventional operation. The 74046 interfe-
rence suppression set is to be used for this purpose.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.
• The LEDs in this item correspond to Laser Class 1 accor-
ding to Standard EN 60825-1.

Important Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or

spare parts.

• The warranty card included with this product specifies the
warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
8
This specially prepared model is an exclusive version, which
reproduces the condition of the original after many years of
operation in wind and weather.
This special series was only produced in a small quantity.
The artificial weathering was separately applied with care-
ful hand work by experienced artisans. Despite a final fixing
of the colors with varnish, this additional application of color
does not form a homogeneous, hard coating.
Therefore, please handle the model with special care and
avoid, scratching, rubbing, or wiping the surface and the de-
tails. Please do not use liquid cleaners or cleaning solutions.

Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: 140 003 SNCB
• Address set at the factory: 25
• Setting the locomotive parameters (address, acceleration/
braking delay, maximum speed):
with the Control Unit, Mobile Station, Central Station.
• Headlights, changing over with the direction of travel.
• Various controllable functions.
• Volume can be changed for the sound effects.
• Only the train control functions and headlight changeover
feature are available in analog operation.