Lenz Digital plus 10331 Mode D'emploi page 35

Bit 8(7) for function 8. If you wish to allocate a function to the
dimming, the respective bit must be set.
57 0-255 Dimming (no ex-works setting)
58 0-255 Shunting speed (ex-works setting F3)
59 0-255 Switching off the delay (ex-works setting F4)
0-255 Lighting effect at function outputs A and B. The units digit of the
60
value stands for function output A, the tens digit for function
output B:
0 No effect
1 Marslight
2 Gyrolight
3 Strobe
4 Double strobe
61 0-255 Function mapping: lighting effect at function outputs A and B
62 0-255 Lighting effect at function outputs C and D.
The tens digit of the value stands
for function output D:
0 No effect
1 Flashing at same time as
function output C
2 Flashing alternately to function
output C
3 Flickering type 2 (less smooth)
4 Flickering type 3 (excitedly)
5 Dimming with value from CV56
The units digit of the value
stands for function output C:
0 No effect
1 Flashing
2 Flickering type 1
(smooth)
3 Dimming with value
from CV55
35
E
0
4
8
0
0
0