Publicité
Les langues disponibles
Les langues disponibles
32
1
2 (1)
Running-notches mode:
0
1
3 (2)
Operational mode:
0
1
4 (3)
not used
5 (4)
0
1
6 (5)
0
1
7-8(6-7)
Not used
30
Bit
Fault display
1 (0)
1
2 (1)
not used
3 (2)
1
control points up.
interchanged: locomotive drives forward if the arrow on the
manual control points down.
Operation with 14 or 27 running notches.
This setting is chosen for digital systems which do not
support the 28 running-notches mode.
Operation with 28 or 128 running notches.
This setting is chosen for digital systems which support the
28/128 running-notches mode.
Locomotive only runs in digital operation.
Locomotive runs both in digital and conventional operation,
flying splice possible.
factory pre-set speed curve is used
User defined speed curve is used
Decoder uses basic address (from CV1)
Decoder uses extended address (from CV17 and CV18)
Light short-circuit
Motor short-circuit
Information SILVER Decoder
0 (dec)
1
1
0
0
0
0
0
0
0
Publicité
