Lock Setting - Distinction PASRW030-BP2 Installation Et Mode D'emploi

4. USE AND OPERATION INSTRUCTION OF WIRE
CONTROLLER
4.6 Clock setting
6.1 System time setting
Flashing
Press "
save, and return to
the main interface
Notes: Under the clock setting interface, if there is no operation for 20 seconds, the system will
automatically memorize user settings, and return to the main interface; if short press "
during any operating steps, the changes will not be saved and return to the main interface.
6.2 Setting and cancelling the Timer ON/OFF function
6.2.1 The wire controller can set up a two-stage timing switch: Timer ON1~ OFF1;Timer ON2~OFF2.
1
6.2.2 Select ,
" " "
On
Long press " "
for 2 s to enter into
the system times
setting interface
System time setting
interface
Press " " or " "
to adjust minute digit
Minute digit flashing
" to
OFF1 OFF
, or timer setting interface:
" " " " "
On2 2
Stort press " "
to enter into
the timer setting
interface
Flashing
Timer setting interface
Short press " "
Hour digit
flashing
Press "
to adjust hour digit
Press " " to
save the settings
and skip to the
minute digit setting
Flashing
Short press" " or
" " to circularly
display among
timer ON1, OFF1,
ON2 and OFF2
Flashing
" or " "
"
13