Temperature Setting - Distinction PASRW030-BP2 Installation Et Mode D'emploi

4. USE AND OPERATION INSTRUCTION OF WIRE
CONTROLLER
Cooling mode
Operation descriptions:
1). Mode switch operation can only be conducted in the main interface.
2). When the unit is under the defrosting state, the defrosting symbol is on,with the display
interface as follows:
Defrosting state
Notes:
1).After completing the defrosting, the unit will be automatically switched to the heating/
automatic mode (keeping consistent with the mode before defrosting).
During the defrosting, mode switch is available. And when switching the mode, the unit won t
work under a new mode until defrosting is completed.

4.5 Temperature setting

Notes: Under the temperature setting interface, if short press "
the main interface without any changes saved; If there is no operation for 5 s or short press
" ", the current mode will be saved, and return to the main interface.
12
Short press" " for to switch the
mode circularly, after no operation
for 2s, the current mode will be saved.
Automatic mode
Press " " or " " for increasing
or decreasing target temperature.
Heating mode
", the system will return to