Safety Instructions - TESTO 0636 Mode D'emploi

10

1. Safety instructions

1.
This chapter gives general rules which must be followed
and observed if the product is to be handled safely.
Avoiding personal injury / damage to equipment
Do not use the measuring instrument and sensors to
measure on or near live parts.
Never store the measuring instrument/probe together
with solvents and do not use any desiccants.
Product safety / preserving warranty claims
Operate the product only within the parameters
specified in the Technical data.
Always use the product properly and for its intended
purpose. Do not use force.
Do not expose handles and feed lines to temperatures in
excess of 70 °C unless they are expressly permitted for
higher temperatures. Temperatures given on
probes/sensors relate only to the measuring range of the
sensors.
Open the product only when this is expressly described
in the documentation for maintenance and repair
purposes.
Carry out only the maintenance and repair work that is
described in the documentation. Follow the prescribed
steps when doing so. For safety reasons, use only
original spare parts from testo.
Ensure correct disposal
Send the product back to testo at the end of its useful
life. We will ensure that it is disposed of in an
environmentally friendly manner.
Safety instructions